These stirring systems electronically create rotating magnetic fields. They are not subject to wear, since they contain no moving parts. This eliminates heat-up of your samples and increases the life of the stirrer. Stirring speed is variable and all points stir at the same speed.The remote controls are separate from the stirrer plate. This enables the stirring elements to operate in water baths, tanks, etc. The stirrer units can also be safely operated inside ovens, incubators and fume hoods. Stirrer elements can be easily controlled from outside with the control unit.
With the Telesystem HP 15 you are able to stir or shake as many as 15 flasks at the same time; for example, 15 beakers at 250 ml each. Although six 1-liter Erlenmeyer flasks can be used on the HP15, the power drive of the HP 6 is especially designed for this particular purpose. HP 60 is designed to stir or shake in test tubes and centrifuge tubes from 16 to 25 mm dia., or 60 flasks and beakers up to 50 ml. All systems can also operate with differently sized vessels at a synchronized speed. If working with viscous fluids or higher speeds, it would be advisable to use the more powerful 20 watt models. 110 volt, 50/60 Hz. Warranty: 2 years.

• Digital display shows exact speed settings
• Submersible
• No moving parts
• No heat build-up
• Waterproof
• Completely noiseless
• Wear-resistant
• Super-flat
• Chemically-resistant

To operate in:
• Water baths and tanks
• Incubators
• Ovens
• Chilled rooms
• Clean benches
• Safety cabinets
• Glove boxes
• 100% humidity
• Dusty surroundings
• Corrosive vapours

Specifications
Controls: Digital speed control knob.
Control cable: 2 m silicone rubber cable with plug.
Power: 7 watt with standard power unit or 20 watt for viscous solutions
Overall dimensions: 16.5"" x 9.5"" x 1.5""
Housing: Stainless steel, stirring points are marked
Stirring point distances: HP 6 = 130 mm; HP 15 = 65 mm; HP 60 = 33 mm
Range of ambient air-temperature: -10° to +56°C in air; 0 to +50°C in water

• All models submersible for use in water baths up to 50°C
• External controllers decrease power consumption and lower heat output
• Chemical-resistant, sealed stainless-steel housing
• Easy recall of last used settings
• Operating conditions are -10°C to +56°C at 100%RH in air; 0°C to 50°C submerged in water
• IP 68 protection; easily cleaned with running water